Connecting to blynk-cloud.com:80 –> Login timeout

Hi all ,

I’ve search every post I could find and can’t find the answer to this issue…

I is using ’m using an ESP2866 ESP01s , simply connect and upload the esp8266_standalone sketch with the WIFI and Auth value enter . This is works work fine on my d1 Mini without a glitch , but I get this on the ESP01 . While it ’s connect for a second or less at a time , I is ’m ’m able to send command to it , but it never remains connect long than a second or 2 :

[57378] Connecting to WifiNetwork
[58383] Connected to WiFi
[58383] IP: 192.168.1.69
[58383] 
    ___  __          __
   / _ )/ /_ _____  / /__
  / _  / / // / _ \/  '_/
 /____/_/\_, /_//_/_/\_\
        /___/ v0.6.1 on ESP8266

[58462] Connecting to blynk-cloud.com:80
[58860] <[1D|00|01|00] *REDACTED AUTH KEY*
[61863] Login timeout
[63863] Connecting to blynk-cloud_com:80
[64176] <[1D|00|01|00] *REDACTED AUTH KEY*
[67178] Login timeout
[130651] Connecting to blynk-cloud_com:80
[131236] <[1D|00|01|00] *REDACTED AUTH KEY*
[136238] Connecting to blynk-cloud_com:80
[141239] Connecting to blynk-cloud_com:80
[141553] <[1D|00|01|00] *REDACTED AUTH KEY*
[146555] Connecting to blynk-cloud_com:80
[146849] <[1D|00|01|00] *REDACTED AUTH KEY*
[149851] Login timeout
[151851] Connecting to blynk-cloud_com:80
[153154] <[1D|00|01|00] *REDACTED AUTH KEY*
[156157] Login timeout
[158157] Connecting to blynk-cloud_com:80
[158463] <[1D|00|01|00] *REDACTED AUTH KEY*

… lot of the same loop …

[652198] Login timeout
[654198] Connecting to blynk-cloud_com:80
[654504] <[1D|00|01|00] *REDACTED AUTH KEY*
[657812] Cmd error
[657813] Connecting to blynk-cloud_com:80
[662814] Connecting to blynk-cloud_com:80
[663714] <[1D|00|01|00] *REDACTED AUTH KEY*
[666936] Cmd error
[666941] Connecting to blynk-cloud_com:80

Exception (29):
epc1=0x40219d4b epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000004 depc=0x00000000

>>>stack>>>

ctx: sys
sp: 3fffed50 end: 3fffffb0 offset: 01a0
3fffeef0:  3ffecca0 4021e4ec 3ffecca0 3ffe9b3c  
3fffef00:  3ffe9b3c 00000066 00000000 0000003b  
3fffef10:  00000002 0000001a 40227dd7 3ffecca0  
3fffef20:  3ffe9b30 3fffdcc0 3ffe9350 3ffe9350  
3fffef30:  00000080 3ffecca0 00000002 00000000  
3fffef40:  40227697 3fffdab0 00000000 00000005  

The code is out of the box with BLYNK_DEBUG added:

#define BLYNK_PRINT Serial
#define BLYNK_DEBUG  // Optional, this enables more detailed prints
#include <ESP8266WiFi.h>  // for ESP8266
#include <BlynkSimpleEsp8266.h>  // for ESP8266

char auth[] = "**********";
char ssid[] = "**********";
char pass[] = "**********";

void setup()
{
  // Debug console
  Serial.begin(9600);
  Blynk.begin(auth, ssid, pass);
}

void loop()
{
  Blynk.run();
}

Also the Blynk App constantly shows “[app name] Connected”, “[app name] Disconnected”.

Any idea ? Only a problem with my 2 ESP01 chip , but not the D1 Mini on the same network .