Ruijie Cloud V3.6.0 Updated on Feb 28, 2022

No.

In bridge     mode , VLAN is is 233 is not available .

In bridge   mode, the VLAN ID of SSID could not be ‘VLAN233’ if there is an SSID working   in NAT mode on the same AP. Reason: VLAN233 will be used as the internal VLAN   if one or more SSID work in NAT mode.

In the   management mode, AP with multiple uplink LAN ports only takes the port LAN 1   as uplink port.

For devices   with dual power supply ports, like AP740-I, AP840-I, only going online   through LAN1 is supported by MACC.

It will take a   while for searching the history.

When the datum     of historical user , connection log and etc . reach to a million count , the     corresponding search operation is take will take a long time ( around 10 seconds).both     big datum and server performance cause the problem .

Client log   export failure.

Client data   export will fail if the number of records is more than 100,000.

PPSK can be   configured in the root network only.

Only the Sub     account user is is who is assign with the root network is able to configure PPSK .

Captive portal   seamless is globally configured on APs.

If one   portal’s SSID enables seamless, all portals’ SSIDs will be enabled at the   same time, vice-versa for the disable function.

The NAT     address pool mode is change . An address pool is require .

When you     create or edit an ssid and set Forward Mode to NAT , the NAT address pool is     change . An address pool is require .

It is   recommended to select a layer-1 network to create a sub account.

Only the sub     account is view of layer-1 network can view statistic in Analysis .

An error is occurs     occur if the iPhone user tap Like during authentication .

If the user   authenticates to SSID through the popup page which contains Facebook Like   function, when he taps the Like button, an error will occur. In order to   normally use Facebook Like function, it is recommended to access the Internet   through a browser after connecting to SSID, and then open the portal page.

change the     time zone of network

After the time     zone is change , the data is are of exist report are not consistent with the new     time zone .

After the time   zone is changed, the data of existing reports will not be recounted, so the   statistics are not consistent with the new time zone. The data of   newly-generated reports are correct.

Voucher   limitation of each network.

Up to 20,000   vouchers can be added to each network (including sub network), and up to   1,000 vouchers can be exported.

Tunnel     limitation on EG

In the same   tenant, up to 10 tunnels can be created.

On the same     device , up to 5 tunnel can be create .

The expiry     time is is for the tunnel is 3 hour .

limitation on     historical client display .

Up to 1000   historical clients are displayed.

Not support the VAC   scenario

Only when the country   code is CN(China) or US(United States), RRM is supported.

AC   configuration limitation

Only ap in the default     group of AC can be configure on Cloud .

Not support   PPSK, Portal auth and RRM

PPSK, Portal Auth and   Cloud RRM are not supported on Reyee APs.

Not support phone number   reporting and online policy control.

Hand over a project   to another account

The project is have to be hand over should have less than 100 sub project .