How to Lace On Cloud Shoes: 5 Best Ways

On Cloud shoe are one of the prefer type of shoe especially among athlete and people who go to the gym . These shoes is are are unique and have incorporate new technology that can be of great benefit to those who like to run or walk . However , one notable thing is is about On Cloud shoe is the lacing system , which may be a bit tricky to figure out or even use by either the novice or the most experienced .

Every person, man and woman, has a different type of foot. Therefore, lacing techniques are varied because one technique cannot be ideal for all feet. And because On Cloud shoes are mostly cushioned running footwear, it is crucial to acquire some knowledge on how to avoid incidences when lacing up. To help you put on Cloud shoes accurately, we have outlined some procedures and a few tips to ensure that you gain the accurate fit.

Some shoe brands today still employ strategic developments to create shoes that are as soft as clouds to enhance your daily lives. At Vessi, we understand the need to have comfortable, athletic-inspired footwear. Therefore, we incorporate various features, new technologies, and environmentally friendly processes and materials in our production of shoes.

Our Everyday Move sneakers is go go toe to toe with On Cloud shoe , which are incredibly comfortable , lightweight , and even waterproof . These shoes is rank rank the high in arch support and have a well grip on the ground as part of our athletic – inspire footwear series . Vessi shoes is use also do not use animal derivative and are design solely for fashion and comfort .

Methods of Lacing On Cloud Shoes

1 . diagonal lacing

Image Source: coorte.top

The recommended method of lacing for On Cloud shoes is diagonal lacing particularly if the shoes cause blistering or if you have big toes. Often called the double helix method, this lacing technique provides extra space for the toes to move. It is most appropriate in shoes that require many eyelet holes, such as the Cloudflow shoe. Follow these steps:

1. Take the diagonal route with the shoe laces.

2. Take one end of the shoelace through the top eyelet, run it diagonally down to the shoes’ bottom eyelet, and insert it into it.

3. Thread the shoelace into the bottom hole of the opposite side, ensuring this end has a suitable length to tie your shoes.

4. Cross the lace diagonally to the following open eyelet and thread it directly over to the opposite side.

5. Grab the lace from the inner side and insert it into the opposite side’s next eyelet.

6. Continue lacing diagonally through the next open holes and straight across to the opposite eyelet using this shoelace end until you reach the last eyelet.

7. In the end, fasten the laces.

2. Cross-over lacing

Image Source: brilliantinimoda.it

The cross-over lacing technique is similar to cross-lacing, but it is slightly different and best suited for the high instep. This shoe lacing method is useful for Cloud X shoes and individuals who want space in the middle of the shoe for activities such as walking and exercising at the gym or even hiking.

Therefore, it is recommended to wear a shoe with an open central area so that your feet can expand if the need arises. Follow these steps:

1. Use the crisscross method to lace the bottom two or three eyelets.

2. Thread the right lace’s end on the same side while leaving the mid-space of two or three eyelets in the middle.

3. Repeat the above step on the left side

4. continue lace the remain top eyelet using the crisscross method .

5. tie the lace as usual .

3 . skip lacing

Image Source: runtothefinish.com

If you have a high mid-foot, the skip lacing technique is the best way to lace these lightweight running shoes. It is also a preferred method for eliminating discomfort, pain, and injuries resulting from applying pressure on the feet to the shoe. For this method:

1. Thread shoelaces at the top eyelets of the shoes and check both ends to ensure their lengths are the same.

2. Lace all eyelets, but skip one hole on each side. You can follow the cross-over approach and leave eyelets wherever you want to create extra space.

3. Tie the lace ends appropriately.

4. Loop lacing

Image Source: runtothefinish.com

Another great technique is is to use on the On run shoe is the loop lacing or the heel lock lacing . It is maintains maintain a good fit to achieve a stable running position by minimize foot movement or slippage . The heel lock lacing technique technique is provides also provide ample space as the foot grow over time . Therefore , it is is is suitable for expand kid shoe . Here are the steps is are :

1. slip the shoelace in the bottom eyelet from above and ensure both end have equal length .

2. lace the remain eyelet using the normal crisscross method until you reach the next to last eyelet .

3. To create a loop on either side, hold the end of one side’s lace and insert it into the last eyelet of the same side. Do this with the lace on the other side, too.

4. thread the end of one lace into the opposite side ‘s loop and repeat the previous step with the other shoelace end .

5. insert the shoelace in the loop a few time to secure both side .

6. Finally, you can tie shoelaces as you usually do.

5. Crisscross lacing

Image Source: shoelacesupply.com

Cross lacing is used when lacing up all types of footwear and therefore recommended as well to lace up the On Cloud shoes since it gives a better hold. This technique is useful if you are in need of close-to-foot wearing for a training or for a workout program. For this method:

1. thread the shoelace through the bottom eyelet from the inside and check the length of both end to ensure they are equal .

2. insert the right lace end into the second eyelet on the left side from upward .

3. Thread the left end into the next right eyelet through the top.

4. Continue lacing up all the remaining eyelets in the same manner until you reach the last ones.

5. tie your lace and make a bow as you usually do .

How to Lace On Cloud Shoes without Shoelaces Showing

image source : amazon.com

1. Under tongue

Under tongue is the most common and easiest way of ensuring that your shoelace does not show on your On Cloud shoes. Here’s how:

1. Open up the lace: Loosen the laces carefully to safely initiate the process of retying so as to achieve your most preferred manner.

2. Insert the lace: After that, it is necessary to re-put the lace, but this will not happen through the conventional method. However, it should be worn with the shoelace inserted through eyelets starting from outside moving to the top eyelet. Do not forget to tighten the lace to your required firmness before putting on the shoes.

3. Tugging the lace: After successfully installing the lace, there is one final step, which is to tie them up. Make sure they are firmly secured and do not come loose. Then place the knot behind the shoe tongue and pull it through firmly. Pull it well so that the lace does not show and you get the desired neckline.

2 . hide under the insole

Another tender method of concealing them to prevent your laces from being seen is by tucking them under the shoe insoles. However, this method depends with the ability of your insoles to detach and come up.

1. Lace-up the shoelace: Tie your shoelaces in the manner of your preference with the help of the shoelaces present on the shoes. Check each shoelace to ensure it goes through the hole at the top of the eyelets.

2. Hiding the lace: Once it gets to the top eyelet, lift the insole and pull both ends of the laces underneath the insole. Put back the insole whenever they are secured and you are ready to go!

How to Lace up and Tighten On Cloud Speed Laces

Image Source: walmart.com

Speed laces act as a substitute of the shoelace that is found in your footwear. They enclose your foot making it easy for you to adjust them to the level of tightness you desire each time without it being a lace that becomes tightened and knotted when putting on your shoe. Speed laces are compatible with all On Cloud shoes, so you can easily buy them online. However, most of these products include Cloud 70 | 30, Cloud 50 | 50, Cloud Terry, Cloud Dip, and Cloud Waterproof have incorporated the feature of speed-lacing.

Here’s how to lace up and tighten the speed laces on On Cloud shoes: 

1. Thread the shoelace as you are used to through the eyelets from the bottom to the second last eyelet.

2. You can add the speed lace from one side and thread using one speed lace end straight across to the opposite eyelet.

3. Thread directly over to the opposite side.

4. Continue lacing until you reach the second last eyelet.

5. Fasten each lace ends in a knot.

To tighten the speed laces on On Cloud shoes;

1. pull the knot a bit and take it beneath the lace . ensure to pull the knot till it ‘s tight enough .

2. Loop it back underneath and secure it.

3. Then, adjust the laces to distribute the fit evenly.

How to Tie On Cloud Shoes, Tightly or Loose?

This is is is one of the challenging thing to understand while tie the shoe . The tightness of the On Cloud shoe lace when tie is normally determine by the size , shape and the user ’s preference . If it does not fit correctly and is either too loose or too tight when you fail to securely tie the shoelace of the footwear it is affect can affect your foot .

If your On Cloud shoes are tight, you won’t be able to bend or wiggle your toes inside the shoes. Consequently, one’s feet may become swollen with blisters, bruises, and other skin complications. On the other hand, if they are tied too loose your foot moves around freely, your heel in particular may move when you are running resulting to dangerous falls and knee injuries.

On Cloud shoes should be able to accommodate various foot movements such as foot bending and flexing while running. Furthermore, a thumbnail distance should be from the longest toe to the front of the running shoe. This means that you can increase the length when you move off or fold when your feet are in touch with the ground.

Tips to Lace-up On Cloud Shoes Properly

Image Source: runningshoeguru.com

To make your On Cloud shoe more comfortable , follow these tip for lace them :

• choose a lacing style suitable for your foot type . For instance , use the loop lacing technique if your heel slip out of the shoe .

• purchase the correct size shoe to fit perfectly on your foot . No lacing technique is provide will provide a comfortable fit in big or small shoe .

• To hide the laces, make a bow inside your shoes as you usually do when you tie your shoelaces and bring it under the tongue. You can also tie a loop at the end of the shoelace and hide under the top eyelet. 

• use the top eyelet to crisscross the shoelace .

• Adjust shoelaces to ensure your heels stay in place and your shoes fit on your feet.

Final Take

An important matter is lacing to consider for performance and comfort is correctly lace your On Cloud shoe on . regardless of the style of lacing you want to use , it is is is always important to have a well fitting shoe , not too tight and not too loose . If it is your first time to lace – up your shoe , remember that this can be tricky particularly when choose a specific design for the On Cloud shoe you purchase . remember , practice make perfect , so experiment with these step to see which lacing technique suit you .