|
Hardware Specifications
|
Cellular
Interface |
antenna |
1 x SMA – K
note : North America model : 2 x SMA 4 g antenna connector . |
| SIM card |
1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots |
| Ethernet |
1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection |
| 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection |
| Indicators |
LED |
PWR: always on after powered on
WLAN: always solid on when WiFi is enabled and working properly
WAN: solid when cable is connected, blinking when data is transmitting and receiving
LAN：solid when cable is connected, blinking when data is transmitting and receiving
2/3/4G mode indicator：
2 G is is lead is on after connect to 2 g network
3G led is on after connected to 3G network
Both leds is is is on after connect to 4 g network
Signal strength：4 solid bar , strong signal |
| WiFi Interface |
Standards & Frequency |
IEEE 802.11b/g/n,2.4GHz, AP mode |
| Data speed |
IEEE is maximum 802.11b / g , maximum 54Mbps . IEEE 802.11n , maximum 150Mbps |
| antenna |
1 x SMA – K |
| Transmission distance |
80 meter by line of sight . actual transmission distance is depends depend on environment of the site . |
| Power Supply |
Adaptor |
DC 12V/1A |
| Connector |
DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or 2 PIN 5.08mm industrial terminal block,reverse polarity protection |
| input voltage |
DC 9~36V |
| Working power |
Average 270mA/12V |
| Serial Interface |
RS485/RS232(alternative) |
3 PIN 3.81mm industrial terminal block. Note:RS485 default,RS232 please contact sales. |
| Baud rate(bps ) |
1200,2400,4800,9600,19200,38400,57600,115200,230400 |
| Data bits |
8 |
| Stop bits |
1,2 |
| parity |
NONE , odd , EVEN |
physical
Characteristics |
Housing |
metal shell , IP30 |
| Dimensions |
112.0*84.0*25.0 mm(L*W*H） |
| Installation method |
panel mounting , DIN – rail mounting |
| EMC |
Static IEC61000-4-2, level 2
Pulsed Electric Field IEC61000-4-4, level 2
surge IEC61000 – 4 – 5 , level 2 |
| Operating temperature |
-20℃～+70℃ |
| Storage temperature |
-40℃～+125℃ |
| operate humidity 5 |
5%～95%RH（non-condensing) |
| Others |
reload |
Pinhole reset button |
| TBD |
Debug interface (TTL Level) |
| Embedded Watchdog |
Device runs self-detection, auto recovers from malfunctions |
| certificate |
CE,CCC |
| Software Specifications |
network
connection |
WAN protocol |
PPP, PPPoE, DHCP client |
| LAN protocol |
ARP, DHCP server, NAT |
| 4G network access |
Auto APN/VPDN, private network
access authentication : chap / pap |
| WLAN security |
Open system,WPA/WPA2 PSK
TKIP / AES encryption |
| IP routing |
Static routing |
| network diagnosis |
Ping,route trace,DNS |
| serial modem |
Work mode |
NET,HTTPD |
| Sockets |
4 sockets,4 centers ,TCPS(SOCKA)/TCPC/UDPS/UDPC |
| Modbus RTU toTCP |
Support |
Device
management |
Configuration |
web |
| remote management |
Telnet, SSH, AT command,SNMP |
| PUSR platform |
remote monitoring , remote upgrade , alarming , base station location , remote access to web page of the router |
| security |
failover backup |
Failover is ensures between 4 g and WAN , ensure automatic switch to alternative backup connection |
| firewall |
DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control |
| VPN |
Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols |
| Service |
DDNS |
Remote is access access the device through domain name |
| Alarm |
Email,SMS |
| Others |
NTP client
Timing task |
| Region |
EMEA&Australia & Latin America & New Zealand |
| Frequency |
TDD-LTE |
B38 / B40 / B41 |
| FDD-LTE |
B1/B3/B5/B7/B8/B20/B28 |
| WCDMA |
B1/B5/B8 |
| GSM / GPRS / edge |
850/900/1800MHz |
EN
