Configure Anyconnect VPN to FTD via IKEv2 with ISE

Introduction

This document describes the basic configuration of Remote Access VPN with IKEv2 and ISE authentication on FTD managed by the FMC.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

• Basic VPN, TLS, and Internet Key Exchange version 2 (IKEv2)
• Basic Authentication, Authorization, and Accounting (AAA) and RADIUS 
• Experience with Firepower Management Center (FMC)

Components Used

information document based software versions :

• Cisco Firepower Threat Defense (FTD) 7.2.0
• Cisco FMC 7.2.0
• AnyConnect 4.10.07073
• Cisco ISE 3.1

information document created devices specific lab environment . All is started devices document started cleared ( default ) configuration . network live , ensure understand potential impact command .

Background Information

IKEv2 and Secure Sockets Layer (SSL) are both protocols used for establishing secure connections, particularly in the context of VPNs. IKEv2 provides strong encryption and authentication methods, offering a high level of security for VPN connections.

This document provides a configuration example for FTD version 7.2.0 and later, which allows remote access VPN in order to use Transport Layer Security (TLS) and IKEv2. As a client, Cisco AnyConnect can be used, which is supported on multiple platforms.

Configure

1. Import the SSL Certificate

Certificates are essential when AnyConnect is configured.

limitations manual certificate enrollment :
1. On FTD, a Certificate Authority (CA) certificate is needed before a Certificate Signing Request (CSR) is generated.
2 . CSR generated externally , different method PKCS12 .

There are several methods to obtain a certificate on FTD appliance, but the safe and easy one is to create a CSR and get it signed by a CA. Here is how to do that:

1 . Navigate   Objects > Object Management > PKI > Cert Enrollment, click  Add Cert Enrollment.
2. Enter the trustpoint name  RAVPN - SSL - cert  .

3. Under the CA Information  tab is choose , choose Enrollment Type   Manual  paste certificate shown image .

FMC – CA Certificate

4. Under Certificate Parameters, enter the subject name. For example:

FMC – Certificate Parameters

5. Under the  Key tab, choose the key type, and provide a name, and bit size. For RSA, 2048 bits is the minimum.

6. Click  Save.

FMC – Certificate Key

7. Navigate to  Devices > Certificates > Add > New Certificate.

8 . Choose  Device. Under Cert Enrollment, choose the trustpoint created, click Addshown image .

FMC – Certificate Enrollment to FTD

9. Click ID, and a prompt to generate CSR is shown, choose  Yes.

FMC – Certificate CA Enrolled

FMC – Generate CSR

10. A CSR is generated which can be shared with the CA in order to get the identity certificate.

11 . receiving identity certificate base64 format , choose disk clicking  Browse Identity Certificate and Import  shown image .

FMC – Import Identity Certificate

12. Once the import is successful, the trustpoint  RAVPN - SSL - cert  is seen as:

FMC – Trustpoint Enrollment Successful

2. Configure RADIUS Server

2.1. Manage FTD on FMC

1 . Navigate   Objects > Object Management > RADIUS Server Group > Add RADIUS Server Group  .

2. Enter the name ISE and add RADIUS Servers by clicking +.

FMC – Radius Server Configuration

3 . Mention IP address ISE Radius server shared secret ( Key ) ISE server .

4. Choose either  Routing  Specific Interface through which the FTD communicates with the ISE server.

5. Click  Save  shown image .

FMC – ISE Server

  6 . saved , Server added   RADIUS Server Group  shown image .

FMC – RADIUS Server Group

2.2 . Manage FTD ISE

1 . Navigate   Network Devices  , and click  Add.

2. Enter the Name ‘Cisco-Radius’ of the server and IP Addressof the radius client which is the FTD communicating interface.

3. Under Radius Authentication Settings, add   Shared Secret.

4. Click  Save  .

ISE – Network Devices

5. In order to create users, navigate to Network Access > Identities > Network Access Users, click  Add.

6. Create a UsernameandLogin Password required .

ISE – Users

7. In order to setup basic policy, navigate to Policy > Policy Sets > Default > Authentication Policy > Default, choose  All_User_ID_Stores.

8 . Navigate  Policy > Policy Sets > Default > Authorization Policy > Basic_Authenticated_Access,   choose   PermitAccessshown image .

ISE – Authentication Policy

ISE – Authorization Policy

3. Create an Address Pool for VPN Users on FMC

1 . Navigate   Objects > Object Management > Address Pools > Add IPv4 Pools.
2. Enter the name  RAVPN - Pool  and Address Range, mask is optional.
3. Click Save.

FMC – Address Pool

4. Upload AnyConnect Images

1 . Navigate   Objects > Object Management > VPN > AnyConnect File > Add AnyConnect File.
2. Enter the name  anyconnect-win-4.10.07073-webdeploy  click  Browse order   chooseAnyconnect file disk , click   Save shown image .

FMC – Anyconnect Client Image

5 . Create XML Profile

5.1. On Profile Editor

1. Download the Profile Editor from software.cisco.com and open it.
2 . Navigate   Server List > Add…

3. Enter the Display Name  RAVPN - IKEV2   FQDN along with the User Group ( alias ) .

4. Choose the Primary protocol as IPsec ,  click   Ok   shown image .

Profile Editor – Server List

5. Server List is added. Save it as  ClientProfile.xml  .

Profile Editor – ClientProfile.xml

5.2 . On FMC

1 . Navigate   Objects > Object Management > VPN > AnyConnect File > Add AnyConnect File.
2. Enter a Name  ClientProfile   click  Browse in order to choose  ClientProfile.xml  file from disk.
3. Click  Save  .

FMC – Anyconnect VPN Profile

6. Configure Remote Access

1 . Navigate  Devices > VPN > Remote Accessand click +  in order to add a Connection Profile shown image .

FMC – Remote Access Connection Profile

2. Enter the connection profile name  RAVPN - IKEV2  create group policy clicking   +in  Group Policyshown image .

FMC – Group Policy

3. Enter the name  RAVPN-group-policy , choose the VPN Protocols  SSL and IPsec-IKEv2  shown image .

FMC – VPN Protocols

4. Under AnyConnect > Profile , choose the XML profile  ClientProfile  from the dropdown, click  Saveshown image .

FMC – Anyconnect Profile

5 . Add Address Pool   RAVPN - Pool   clicking  +    shown       image.

FMC – Client Address Assignment

6. Navigate to  AAA > Authentication Method, and choose  AAA Only.

7. Choose  Authentication Server as  ISE (RADIUS).

FMC – AAA Authentication

8 . Navigate   Aliases , enter an Alias Name  RAVPN - IKEV2 , which is used as a user group in  ClientProfile.xml   .

9. Click Save.

FMC – Aliases

10. Navigate to Access Interfaces, and choose the interface where RAVPN IKEv2 must be enabled.

11. Choose the identity certificate for both SSL and IKEv2.

12. Click  Save.

FMC – Access Interfaces

13 . NavigateAdvanced  .

14. Add the Anyconnect Client images by clicking +.

FMC – Anyconnect Client Package

15. UnderIPsec, add theCrypto Maps  shown image .

FMC – Crypto Maps

16 .   IPsec , add   IKE Policy by clicking +.

FMC – IKE Policy

17. Under  IPsec , add   IPsec/IKEv2 Parameters  .

FMC – IPsec / IKEv2 Parameters

18. Under  Connection Profile, new profile   RAVPN - IKEV2  is created.

19. ClickSaveshown image .

FMC – Connection Profile RAVPN – IKEV2

20. Deploy the configuration.

FMC – FTD Deployment

7. Anyconnect Profile Configuration

Profile on PC, saved under  C:\ProgramData\Cisco\Cisco Anyconnect Secure Mobility Client\Profile .

<?xml version="1.0" encoding="UTF-8"?>
<AnyConnectProfile xmlns="http://schemas[dot]xmlsoap<dot>org/encoding/" xmlns:xsi="http://www[dot]w3<dot>org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas[dot]xmlsoap[dot]org/encoding/ AnyConnectProfile.xsd">
   <ClientInitialization>
	  <UseStartBeforeLogon UserControllable="true">false</UseStartBeforeLogon>
	  <AutomaticCertSelection UserControllable="true">false
      </AutomaticCertSelection>
	  <ShowPreConnectMessage>false</ShowPreConnectMessage>
	  <CertificateStore>All</CertificateStore>
	  <CertificateStoreOverride>false</CertificateStoreOverride>
	  <ProxySettings>Native</ProxySettings>
	  <AllowLocalProxyConnections>true</AllowLocalProxyConnections>
	  <AuthenticationTimeout>12</AuthenticationTimeout>
	  <AutoConnectOnStart UserControllable="true">false</AutoConnectOnStart>
	  <MinimizeOnConnect UserControllable="true">true</MinimizeOnConnect>
	  <LocalLanAccess UserControllable="true">false</LocalLanAccess>
	  <ClearSmartcardPin UserControllable="true">true</ClearSmartcardPin>
	  <AutoReconnect UserControllable="false">true
		 <AutoReconnectBehavior UserControllable="false">DisconnectOnSuspend 
 		  </AutoReconnectBehavior>
	  </AutoReconnect>
	  <AutoUpdate UserControllable="false">true</AutoUpdate>
	  <RSASecurIDIntegration UserControllable="true">Automatic
      </RSASecurIDIntegration>
	  <WindowsLogonEnforcement>SingleLocalLogon</WindowsLogonEnforcement>
	  <WindowsVPNEstablishment>LocalUsersOnly</WindowsVPNEstablishment>
	  <AutomaticVPNPolicy>false</AutomaticVPNPolicy>
	  <PPPExclusion UserControllable="false">Disable
		 <PPPExclusionServerIP UserControllable="false"></PPPExclusionServerIP>
	  </PPPExclusion>
	  <EnableScripting UserControllable="false">false</EnableScripting>
	  <EnableAutomaticServerSelection UserControllable="false">false
		 <AutoServerSelectionImprovement>20</AutoServerSelectionImprovement>
		 <AutoServerSelectionSuspendTime>4</AutoServerSelectionSuspendTime>
	  </EnableAutomaticServerSelection>
	  <RetainVpnOnLogoff>false
	  </RetainVpnOnLogoff>
	</ClientInitialization>
	<ServerList>
		<HostEntry>
			<HostName>RAVPN - IKEV2</HostName>
			<HostAddress>ftd.cisco.com</HostAddress>
			<UserGroup>RAVPN - IKEV2</UserGroup>
		        <PrimaryProtocol>IPsec</PrimaryProtocol>
		</HostEntry>
	</ServerList>
</AnyConnectProfile>

Note: It is recommended to disable the SSL client as tunneling protocol under the group policy once the client profile is downloaded to the PC of all the users. This ensures that users can connect exclusively using the IKEv2/IPsec tunneling protocol.

Verify

You can use this section in order to confirm that your configuration works properly.

1. For the first connection, use the FQDN/IP in order to establish an SSL connection from the PC of the user through Anyconnect.
2. If the SSL protocol is disabled and the previous step cannot be performed, ensure that the client profile ClientProfile.xml  present PC path  C:\ProgramData\Cisco\Cisco Anyconnect Secure Mobility Client\Profile  .
3. Enter the username and password for authentication once prompted.
4. After successful authentication, the client profile is downloaded on the PC of the user.
5 . Disconnect Anyconnect .
6. Once the Profile is downloaded, use the drop-down in order to choose the hostname mentioned in the client profile  RAVPN - IKEV2  in order to connect to Anyconnect using IKEv2/IPsec.
7. Click Connect.

Anyconnect dropdown

8. Enter the username and password for authentication that was created on the ISE server.

Anyconnect Connection

9 . Verify Profile Protocol ( IKEv2 / IPsec ) connected .

Anyconnect Connected

FTD CLI Outputs :

firepower # is show vpn - sessiondb detail anyconnect 

Session Type: AnyConnect

Username : ikev2-user                    Index        : 9
Assigned IP  : 10.1.1.1                  Public IP    : 10.106.55.22
Protocol     : IKEv2 IPsecOverNatT AnyConnect-Parent
License      : AnyConnect Premium
Encryption   : IKEv2: (1)AES256 IPsecOverNatT : (1)AES-GCM-256 AnyConnect - Parent : (1)none
Hashing      : IKEv2: (1)SHA512 IPsecOverNatT : (1)none AnyConnect - Parent : (1)none
Bytes Tx     : 450                         Bytes Rx     : 656
Pkts Tx       : 6                            Pkts Rx       : 8
Pkts Tx Drop : 0                           Pkts Rx Drop : 0
Group Policy : RAVPN-group-policy          Tunnel Group : RAVPN - IKEV2
Login Time   : 07:14:08 UTC Thu Jan 4 2024
Duration     : 0h:00m:08s
Inactivity   : 0h:00m:00s
VLAN Mapping : N /                           VLAN          :
Audt Sess ID : 0ac5e205000090006596618c
Security Grp : none                         Tunnel Zone  : 0

IKEv2 Tunnels: 1
IPsecOverNatT Tunnels: 1
AnyConnect-Parent Tunnels: 1

AnyConnect - Parent :
Tunnel ID    : 9.1
Public IP    : 10.106.55.22
Encryption.  : none.                           Hashing     : none 

Auth Mode    : userPassword 
Idle Time out: 30 Minutes                      Idle TO Left : 29 Minutes 
Client OS    : win 
Client OS Ver: 10.0.15063 
Client Type  : AnyConnect 
Client Ver    : 4.10.07073

IKEv2:
Tunnel ID : 9.2
UDP Src Port : 65220                             UDP Dst Port : 4500
Rem Auth Mode : userPassword
Loc Auth Mode : rsaCertificate
Encryption   : AES256                            Hashing      : SHA512
Rekey Int (T): 86400 Seconds                     Rekey Left(T): 86391 Seconds
PRF : SHA512                                      D / H Group     : 19
Filter Name  : 
Client OS    : Windows Client                    Type         : AnyConnect 

IPsecOverNatT :
Tunnel ID    : 9.3
Local Addr   : 0.0.0.0/0.0.0.0/0/0
Remote Addr  : 10.1.1.1/255.255.255.255/0/0
Encryption    : AES - GCM-256                        Hashing        :
Encapsulation: Tunnel 
Rekey Int (T): 28800 Seconds                     Rekey Left(T) : 28791 Seconds 
Idle Time Out: 30 Minutes                        Idle TO Left  : 29 Minutes 
Bytes Tx     : 450 Bytes                         Rx            : 656 
Pkts Tx      : 6                                 Pkts Rx       : 8 



firepower# show crypto ikev2 sa 

IKEv2 SAs:

Session-id:6, Status:UP-ACTIVE, IKE count:1, CHILD count:1

Tunnel-id Local                         Remote                                           fvrf/ivrf            Status     Role
16530741  10.197.167.5/4500             10.106.55.22/65220                                                    READY      RESPONDER
Encr: AES-CBC, keysize: 256, Hash: SHA512, DH Grp:19, Auth sign: RSA, Auth verify: EAP
Life/Active Time: 86400/17 sec
Child sa: local selector 0.0.0.0/0 - 255.255.255.255/65535
remote selector 10.1.1.1/0 - 10.1.1.1/65535
ESP spi in/out: 0x6f7efd61/0xded2cbc8 


firepower# show crypto ipsec sa 

interface: Outside
    Crypto map tag: CSM_Outside_map_dynamic, seq num: 30000, local addr: 10.197.167.5
    
      Protected vrf: 
       local ident ( addr / mask / prot / port ): ( 0.0.0.0/0.0.0.0/0/0 )
      remote ident (addr/mask/prot/port): (10.1.1.1/255.255.255.255/0/0)
      current_peer: 10.106.55.22, username: ikev2-user
      dynamic allocated peer ip: 10.1.1.1
      dynamic allocated peer ip(ipv6): 0.0.0.0
     
      #pkts encaps: 6, #pkts encrypt: 6, #pkts digest: 6
      #pkts decaps: 8, #pkts decrypt: 8, #pkts verify: 8
       # pkts compressed : 0 , # pkts is decompressed decompressed : 0
      #pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
      #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
       # PMTUs is sent sent : 0 , # PMTUs rcvd : 0 , # decapsulated frgs needing reassembly : 0
      #TFC rcvd: 0, #TFC sent: 0
       # Valid ICMP Errors rcvd : 0 , # Invalid ICMP Errors rcvd : 0
      #send errors: 0, #recv errors: 0

      local crypto endpt.: 10.197.167.5/4500, remote crypto endpt.: 10.106.55.22/65220
      path mtu 1468, ipsec overhead 62(44), media mtu 1500
      PMTU time remaining (sec): 0, DF policy: copy-df
       ICMP error validation is disabled : disabled , TFC packets : disabled
      current outbound spi: DED2CBC8
      current inbound spi : 6F7EFD61

  inbound esp sas:
      spi : 0x6F7EFD61 ( 1870593377 )
      SA State : active
      transform : esp - aes - gcm-256 esp - null - hmac compression
     in use settings ={RA, Tunnel, NAT-T-Encaps, IKEv2, }
     slot: 0, conn_id: 9, crypto-map: CSM_Outside_map_dynamic
     sa timing: remaining key lifetime (sec): 28723
     IV size: 8 bytes
      replay detection support : Y
     Anti replay bitmap: 
     0x00000000 0x000001FF

  outbound esp sas:
     spi : 0xDED2CBC8 ( 3738356680 )
    SA State: active
    transform: esp-aes-gcm-256 esp-null-hmac no compression 
    in use settings ={RA, Tunnel, NAT-T-Encaps, IKEv2, }
    slot: 0, conn_id: 9, crypto-map: CSM_Outside_map_dynamic
    sa timing: remaining key lifetime (sec): 28723
    IV size: 8 bytes
    replay detection support: Y
    Anti replay bitmap: 
    0x00000000 0x00000001

ISE Logs:

ISE – Live Logs

Troubleshoot

This section provides information you can use in order to troubleshoot your configuration.

debug radius all
debug crypto ikev2 platform 255
debug crypto ikev2 protocol 255
debug crypto ipsec 255