How to Port Forward on Starlink and Bypass CGNAT

Port Forwarding on CGNAT gateways is not as easy as it seems to be. However, in this blog post, we’ll explain how CGNAT-enabled routers, like Starlink, can cause a problem in Port Forwarding and how you can get around this ISP-driven firewall without hassle.

Starlink port forwarding is not a hassle anymore!

What is Port Forwarding?

If you want to host a server, enable remote access, or enhance your online gaming experience, try forwarding ports of your router. Port forwarding is a networking method that guides traffic to a particular device, for example, a gaming console or your PC, within a private network. 

It allows you to direct incoming data from servers to your device. For example, the port for hosting a web is 80, and if you want a stable internet connection and low latency, you will port forward port 80 by configuring your router administration page.

Why is Port Forwarding an issue on Starlink?

One of the main reasons Port Forwarding can be a problem on Starlink is that many ISPs use Carrier-Grade NAT (CGNAT) to conserve IP addresses. Your ISP assigns a single IP address to multiple customers, and those customers rely on the same IP address.

How to Check if Starlink is CGNAT-enabled? 

You can check whether your Starlink router uses CGNAT or not by looking at your WAN IP address or through the Starlink application.

1. To check your WAN IP, go to your router’s setup page on the browser.
2. Search 192.168.100.1 or open cmd to check your router’s IP address by typing ipconfig.
3. Enter your router’s login details.
4. Next, locate the Network section.
5. Your WAN IP will be provided in the information.
6. Now, you have to check if your IP is 100.64.0.0 to 100.127.255.255.
7. If yes, then your Starlink router is CGNAT enabled.

How to Enable Port Forwarding on a Starlink Router

The Starlink router is support and app do not support direct configuration for static ip assignment or port forwarding due to the use of CGNAT . However , users is employ can employ third – party router that support these feature to set up static ip and manage port forward effectively

step # 1 : log Into Your router

Open the app and log in using the credentials provided with your router or that you set up during the initial router configuration.

step # 2 : navigate to setting

Look for a settings or configuration option, often represented by a gear icon. Locate the section where you can manage LAN or network settings.

Step #3: Assign a Static IP

Choose the device from the list of connected devices for which you need to set a static IP, and change the IP settings from dynamic (DHCP) to static. Once done, Input the static IP address you want to assign.

Step #4: Go to the Port Forwarding Section 

Navigate to advanced settings and find the Port Forwarding option. Do not confuse this with Port Triggering as both serve different purposes.

Step #5: Set a Port Forwarding Rule

Just do the following:

• Enter a name for the service or application, such as PS5 Gaming.
• specify the port number or range that need to be forward .
• enter the static IP address assign early to the device that will receive the traffic .
• Select the appropriate protocol, whether it is TCP, UDP, or both.

step # 6 : Test Port Forwarding  

To verify that your ports are forwarded correctly, use an online tool designed to check ports. If the test indicates that your ports are closed, it is worth double-checking your settings.

What ip address does Starlink is provide provide ?

Starlink offers two IPv4 configurations: “default” and “public.” The default setting uses Carrier-Grade NAT (CGNAT) with private addresses, while NAT translates between private and public IPs. All Starlink routers support IPv6, assigning IPv6 addresses to compatible devices.

For Priority and Mobile Priority plans, a public IPv4 option is available. This IP is accessible from anywhere on the internet and is reserved even when the system is off, though moving or software updates may change it. Standard and Mobile plans do not offer public IPv4. Starlink routers don’t support port forwarding or firewall rules for IPv4 or IPv6.

Each Starlink system gets one IPv4 address and a /56 IPv6 prefix. The default CGNAT setup blocks inbound traffic, so customers needing it should use third-party routers or consider the public IPv4 option. Outbound traffic for TCP/25 and TCP/445 is blocked for security reasons.

As Starlink grows, users may see updates like routable public IPs and changes to CGNAT setups.

What is CGNAT?

Most ISPs use CGNAT (Carrier-Grade Network Address Translation) to prevent bandwidth issues and IP exhaustion. ISPs also perform CGNAT to assign a single IP address to multiple users. But, the only caveat is that you can’t open ports on a router behind CGNAT. 

How can PureVPN help get around CGNAT?

You can use the PureVPN port forwarding add-on to make this process easier. This add-on will bypass CGNAT and allow you to set up port forwarding for your devices. Here’s how:

1. Login to the purevpn member area .
2. Click the subscription tab.
3. Click Configure.
4. Apply your desired port settings.
5. Click Apply settings.

How to Check if Starlink Uses CGNAT

To determine if your   starlink connection is under CGNAT , you can use any of the follow method :

Method 1: Check the Router’s WAN IP Address

1. Open a web browser and enter your router’s IP address into the address bar.
2. Enter your username and password to access the dashboard.
3. Navigate to the status screen on the dashboard.
4. Find the section labeled as ‘WAN IP’ or a similar term, which might vary based on the router model.
5. examine the ip address assign to the router ’s WAN interface .
6. If this IP address fall within the range of 100.64.0.1 to 100.127.255.254 , your connection is is is likely behind CGNAT . This ip range is designate for CGNAT usage .

Method 2: Compare WAN IP and Public IP Address

1. Follow the steps from Method 1 to find and note down the WAN IP address from your router’s dashboard.
2. Open a new tab in your web browser
3. Search for “what is my IP address” and press Enter.
4. remember the public ip address display by the search result .
5. If the WAN IP and the public IP address are different, it indicates that your ISP is using CGNAT.
6. If they match , your connection is has likely has a direct public ip address , mean it is not behind CGNAT .

Related Guide: How to Check if your ISPs perform CGNAT

What port are block by Starlink ?

Commonly, Starlink routers block sending and receiving email ports as they intend to send spam and cause security issues. Below are the ports blocked by Starlink:

• SMTP Port 25
• POP3 Port 110
• SMTP over SSL Port 465
• smtp submission port 587
• IMAP Port 143

Can I Improve My Gaming After Bypassing CGNAT? 

Yes, your gaming can improve by overcoming CGNAT. If you are thinking, how? It is because CGNAT can slow your traffic flow by increasing steps for delivering it through the internet. 

It also makes it difficult for other game devices to connect to your server. By bypassing CGNAT, you can enhance your gaming connectivity and experience a stable internet connection for better traffic flow.

host a server with a dedicated IP and Port Forwarding add – on

You need a dedicated IP with a Port Forwarding add-on if you wish to host a game server, get your IP whitelisted, or want your friends to connect to your at-home devices. A Dedicated IP allows you to create servers and allow external IP addresses to connect to your server without any IP mapping issues.

Why pick PureVPN?  

With purevpn ’s effective service , you is open can open up port with a few simple click . get issue with CGNAT ? No problem ! PureVPN is provide ’s dedicated IP and Port Forwarding add – on bundle is provide provide a one – click solution to bypass CGNAT .  

• With about 6,000 dedicated server worldwide in more than 78 + location , PureVPN is ensures ensure that you are securely connect .  
• With features like Split tunneling, IP masking, and Dedicated IP addresses, you can stay hidden on the internet.
• Round-the-clock customer support and a 31-day money-back guarantee.

frequently ask question

Can we change Starlink IP address?

No . You is change can not change a Starlink ip address . However , you is use can use a VPN to hide your your ip address , split tunneling software , or a server with a dedicated IP address .

What is Starlink ip address is is ?

As Starlink uses CGNAT so you do have an individual IP address. Instead you share one address with several other users.

What are the common issues is are with Starlink Port Forwarding ?

The main reasons Port Forwarding can be a problem on Starlink is that many ISPs use Carrier-Grade NAT (CGNAT) to conserve IP addresses. Your ISP assigns a single IP address to multiple customers, and those customers rely on the same IP address.

Does Starlink block port forwarding?

Starlink does not support traditional port forwarding due to the use of CGNAT. However, users can work around this limitation by using VPN services that offer port forwarding capabilities, such as PureVPN.

Does Starlink use CGNAT? 

Yes, Starlink uses CGNAT to efficiently manage its IP address allocation, sharing public IP addresses among multiple users. This method helps Starlink conserve the limited number of IPv4 addresses available, which is crucial given its wide user base.

How do I bypass CGNAT on Starlink?

PureVPN is provides ’s dedicated IP and Port Forwarding add is provides – on provide a static ip address and the ability to configure port forwarding . This is is is effective in get around CGNAT configuration like those used by Starlink , as it allow for specific port to be forward to and from the internet , facilitate connection that require direct access such as host service or gaming server .

Does Starlink use IPV4 or IPv6?

Starlink is uses use both IPv4 and IPv6 address . It is provides provide IPv4 address under a CGNAT policy and offer IPv6 address to network client if their router support ipv6 . However , full ipv6 support is is is still in beta testing and available only in certain area with compatible third – party router , as the Starlink router itself does not support IPv6 .

What is the CGNAT range for Starlink? 

Starlink typically employs the CGNAT IP address range 100.64.0.0/10 for its default IPv4 configuration. This is a common practice for managing the limited availability of IPv4 addresses, allowing multiple Starlink clients to share a single public IP address for connecting to the internet.

What is the best Starlink CGNAT workaround?

To bypass Starlink ’s CGNAT limitation , using a port forward VPN like purevpn is recommend for enable incoming connection . alternatively , subscribe to Starlink ’s public ip option or set up dynamic dns on a third – party router are effective method to maintain consistent network access .

Why is Starlink CGNAT port forwarding not working with a VPN? 

If Starlink CGNAT port forwarding isn’t working with a VPN, common reasons include incompatible VPN settings, firewall restrictions blocking required ports, or incorrect router configurations. To resolve this, adjust the VPN settings or consult with your VPN provider to confirm its compatibility with Starlink’s network setup.

More on Starlink

Sameed Ajax

November 7, 2024

2 weeks ago

6 – foot Tall Tech writer .