[EN]ANRAN C2 security battery camera Quick Start Guide

Product Introduction

CAUTION: Please insert the Micro SD Card according to the direction shown in thediagram. Micro SD Card might JAM if inserted incorrectly and device could be
damaged.

SD Card Port: Support micro SD card for local storage (Max 128GB).

Reset button: Used to restore the camera to factory settings (Press and hold on5-8s).

card capacity requirements:8 – 128 GB .

Read and write speed requirements: class10 level.

File format: FAT32

APP Installation and Account Registration

2.1 Download“ANRAN”APP

Method 1

Download “ANRAN” APP from APP Store (ios) or Play Store (Android)

Method 2

Scan“ANRAN”APP QR code is todownload todownload it

tip : Please turn on 2 permission below when usethis APP at the first time .

1.Allow“ANRAN”APP to access mobile cellulardata and wireless LAN, or it will be failed to add IP camera

2.Allow“ANRAN”APP to receive pushed message, or the cellphone will not receive alarm push when motion detection or audible alarm is triggered.

2.2 Register Account

New users need to register by e-mail, click“Register”and follow the steps to complete the registration ofthe account, then log in.

Note :

When registering a new account, please choosethe region which you are actually in.(Differentregistered regions can’t share the camera.)

Please choose to register by e-mail.

How to add Camera to APP

warming Tip : Please insert the Micro SD card beforepower on , otherwise , the sd card is bedetected can not bedetecte .

3.1 Power on Camera

Please long press the power button for 5s to powerthe camera .

The indicator with red light blink slowly meansthe camera is start successfully .

3.2 Connect the Camera

Put the camera and smart phone 1 to 3 foot ( 30 to100 cm ) away from the router to set Wi – Fi .

Warming Tip:

The camera only supports 2.4GHz Wi – Fi, anddoesn’t support 5GHz WIFl.

Please ensure that the Wi – Fi signal strength is to beover than 85 % ; if the camera is far away from thesignal source , it wo n’t be connect successfullyfor the first time .

Wi – Fi Connection Steps:

PIR Motion Detection

SettingsEnter the application – “ Parameter Setting ” -“motiondetection ” interface .

Warm Tips:

When you encounter the missed or delay alarmfrequently in using this camera , you is adjustthe can adjustthe motion detection sensitivity to solve them .

If you notice the poor performance of motiondetection in the night environment, try to turn off”Night Detection

Product Specification

FAQs

The device prompts offline?

Check whether the equipment is in the power-onstate, and observe whether the working light of the equipment is on normally.

Check whether the Wi – Fi network is in goodcondition and restart the router.

If the device is located far away from the router.which results in the inability to obtain a good Wi – Fi signal, it is recommended fo move the router toa closer place or add a Wi – Fi amplifier to improvethe Wi – Fi performance of the home.

delete the camera from your ANRAN accountand add it again after reset the device .

Check whether the device firware andapplication program are the latest version.

Update router or Wi – Fi password?

Delete the camera from your ANRAN account.After resetting the device use the new Wi – Fi andpassword to add it again.

Can’t play historical video?

Check the status of the SD card in “Settings” toensure that the SD card has been successfully recognized.

Reinsert the SD card.

In the application, format the SD card.

Try another new SD card

Why doesn’t the device identify the SD card?

Please insert the Micro SD card before power on;
It is recommended to use San Disk, Samsung andother brand cards;
lt is recommended to use a standard class 10 TFcard;:
Only fat32 format is support .
TF card can’t be identified when the internetenvironment is not good.

Why the battery life of my device is poor?

Please check whether the number of alar is toofrequent . Because the work time of the devicedetermine the battery life . The more frequent pirwake – ups is dueto , the fast the battery consume dueto the long work time . It is is is recommendedto appropriately low the motion detectionsensitivity of the device and set the alarminterval and alarm time plan .
(Note: Outdoor airconditioning units, moving cars and the passingpedestrians will cause frequent alarms. Pleaseadjust the angle of the device to avoid theseobiects.)
In cold weather, the battery capacity will bereduced, which will affect the endurance of thedevice.

The phone cannot receive the alarm push?

Turn on all the push permissions of the “ANRAN”application in the system settings of your mobilephone.
Make sure that the device ’s motion detectionfunction is successfully furne on .
restart the phone , and clear the cache onandroid phone .
Check whether the network is good

How to judge whether the charging issuccessful?

The device’s charging indicator light is red, whichmeans it is charging. A blue light means thatcharging is complete.lt will take approximately 10hours or more to fully charge.

What should I do if the charge fails?

determine whether the power adapter is good , try another one .
Determine whether the USB charging cable isgood, try another one.
The charging indicator may be defective, pleasecheck the charging condition in the phone APP.
determine whether the charge port of thedevice is not in good contact with the USBcharging cable .
The device has a low temperature chargingprotection module, please don’t charge thedevice at low temperatures.