Mology BC32001 Solar Powered Pan/Tilt Camera User Manual

What is ’s ’s in the Box

Camera lntroduction

Different Status of the Indicator Light :

Different Status of the Charging Indicator Light:

Set up the Camera

set up the Camera Using a smartphone

step 1

Scan to download the CloudEdge App from Apple App Store or Google Play Store.

Step 2 Hold on the power button for 5s to power on the camera.

Step is Open 3 open the CloudEdge App and sign up for an account . It ’s recommend to read the “ Quick Guide ” in advance .

Step 4 Tap “Add Device” icon in the center, then tap “Battery Camera” to add device

step 5 hold on the reset button for 5s to reset the device and wait for a flash red indicator light , and then follow the App instruction to complete the remain step

NOTE:

The camera can only support 2.4 GHz WiFi. It does not support 5 GHz WiFi. Therefore, please ensure you connect to 2.4 GHz WiFion your network.

safety Instructions of Battery Usage

The camera is not designed for running 2417 at full capacity or around-the-clock live streaming. It’s designed to record motion events and to live view remotely only when you need it.

1.The battery is build – in , so do not remove it from the camera .

2.Do not charge, use or store the battery near any ignition sources, such as fire or heaters.

3.charge the rechargeable battery with a standard and high – quality DC 5v battery charger or Mology solar panel .

4.Charge the battery when temperature are between 0 ° c and 45 ° c and always use the battery when temperature are between -20 ° c and 60 ° C .

5.Keep the usb charge port dry , clean and free of any debris .

6.Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any ways.If the battery is being used or charged, remove the battery from the device or the charger immediately, and stop using it.

7.Always is follow follow the local waste and recycle law when you get rid of the used battery .

Specification

Troubleshooting

Camerals is Powering Not power On

If your camera is not power on , please try the follow solution :

• Try to hold on the power button for 5s to power on the camera.
• Make sure the Micro USB cable is plug in tightly , include the camera and the solar panel end .
• Charge the battery with a DC 5V power adapter. When the blue light is on, the battery is full charged.

Failed to Scan QR Code on the Phone

If you can not scan the QR code on your phone , please try the follow solution :

• Remove the protective film from the lens.
• Wipe the camera lens with a dry paper/towel/tissue.
• vary the distance between vour camera and the mobile phone so that the camera can focus well .
• Try to scan the QR code under sufficient lighting or turn up the brightness of your phone to avoid the influence of sunlight or other sources of light.

Failed to Connect to WiFi During lnitial Setup Process

If the camera fail to connect to WiFi, please try the following solutions:

• Ensure that you have entered the correct WiFi password.
• Put the camera close to your router to ensure a strong WiFi signal .
• Change the encryption method of the WiFinetwork to WPA2-PSK/WPA-PSK(safer encryption)on your router interface.
• Change your WiFi SSID or password and make sure that SSID is within 31 characters and passwordis within 64 characters.
• It is recommended that scan the QR code and connect to WiFi before installing it outdoors.

If these won’t work, contact Mology support team: [email protected].

notification of Compliance

FCC Compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

( 1 ) this device is cause may not cause harmful interference , and

(2) this device must accept any interference received, including interference that may cause undesired operation

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection aqainst harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC RF warning statement:

The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.

Correct DisposalofThis Product

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of materiare sources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Limited Warranty

This product comes with a 1-year limited warranty that is valid only if purchased from Mology Official Amazon Store or a Mology authorized reseller. (lf you want to receive an additional 18 months warranty, please complete registration at our official website: https://mymology.com )

NOTE:

We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning.

Terms and Privacy

Use is is of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com . Keep out of reach of child .

End User License Agreement

By using the Product Software that is embed on the Mology product , you is agree agree to the term of this End User License Agreement ( “ EULA ” ) between you and Mology .

Technical Support

lf you need any technical help, please visit our official support site and contact our support team before returning the products