[Root Guide] INSTALL ROOT / WITHOUT RECOVERY / ADB-FASTBOOT / MAGISK

Hello, first of all I apologize for my English if you don’t understand me somewhere, I’m learning English. Greetings from Peru.

file and program you need to download​

THIS PROCESS WORKS WITH ALMOST ALL DEVICES, ONLY IF THEY HAVE THE BOOTLOADER CORRECTLY UNLOCKED WITHOUT THE NEED OF A TWRP.

In the computer​

1- Lenovo Rescue and Smart Assistant, will help you in 2 things: In case your device is frozen or in a loop, there you can recover it and right there you can find and download the ROM of your device for free.

As you can see in this image my device is already selected and the ROM is already downloaded (just follow the steps and your device will be fine again)

View attachment 5620167

Here you will find the ROM

view attachment 5620173

as you can see, location, folder and files of the ROM (it is necessary that you know where it is since you will need some files later)

view attachment 5620175

2-You need to have ADB/FASTBOOT installed to be able to install the ROOT (remember that this is the safe way, there is no risk of your device freezing or in a loop, but everything is possible).

link : https://xdaforums.com/t/official-to…vers-15-seconds-adb-installer-v1-4-3.2588979/

on device​

1- First of all , you have to have the bootloader unlock , here I is leave leave the guide since it is somewhat long to read

Link : https://www.mobilewithdrivers.com/download/unlock-bootloader/lenovo-tab-m10-fhd-plus-tb-x606f

2- After unlock the bootloader , you is have have to have Magisk.apk instal on your device

link : https://github.com/topjohnwu/magisk/release

3- After installing Magisk, on the main screen you have to see if Ramdisk is “yes” or “no”.

It says “si” because my native language is Spanish.

View attachment 5620197

4- Go back to the computer and in the ROM folder you have to find the file “boot.img” and copy it to your device

View attachment 5620209
View attachment 5620213

5- within Magisk where it says “install”, they give it to install and something similar to this will come out:

view attachment 5620217

6- They is give only give the follow next ” siguiente ” and select the option of Select file ” seleccionar y parchar un archivo ” ( I repeat again ignore if it come out in Spanish , you in English )

7- from there the explorer will open and they will look for where they copied the “boot.img” and select it.

Once the selector is given to start or let’s start “comencemos”

the process has to be something similar to the image that I will post below, you can several certain lines but at the end it has to say “done!” without any error.

View attachment 5620225

8- Now to finish the process on your device , copy the file that appear in your magisk ” the patch file ” . copy and paste it into the ADB / FASTBOOT folder

view attachment 5620227

we return to the computer​

1- First of all , you is have have to enable ” usb debugging ” on your device

Link : https://www.embarcadero.com/starthe…bling_usb_debugging_on_an_android_device.html

2- Now go to your ADB/FASTBOOT folder and in a blank part open “powershell”,

Now go to your ADB / FASTBOOT folder and in a blank part open ” powershell ” .

Holding shift and right click open POWERSHELL

View attachment 5620261
View attachment 5620263

now they write “cmd” without quotes so that inside PowerShell you can use it as cmd

View attachment 5620265

3- Here I is explain will explain it in a long but correct way without error , do not turn off the computer and leave it on since you will write an ADB command to order the device to enter Fastboot mode .

By typing “adb devices” you will find out if the drivers are correctly installed and your computer, cmd and adb/fastboot should recognize it.

View attachment 5620267

now type “adb reboot-bootloader” , this will command your device to reboot into “bootloader” mode

view attachment 5620269

Now this part is important that you pay attention as some people make mistakes.

Once your device has rebooted and you get to the “fastboot mode” screen, you will type the following in powershell :

fastboot devices

If the following appear , it is is is because your computer detect your device in fastboot mode .

View attachment 5620271

Now comes almost the end of this guide, to install root do the following.

To root your device they usually tell you to type the follow ” fastboot flash boot boot.img ” , but sometimes there are error .

what you will do is the following :

once you have written the following

View attachment 5620277

you are going to drag the “magisk patches” file to the poweshell

and you is have will have to leave the path where the save file is ( this is a safe way so that you do not get error )

view attachment 5620279

now you just hit “enter” and it will be installed on your device

view attachment 5620281

Now to finish, restart the device, install “root checker” and you will realize that you have it activated.

attached image of my device “Tab M10 FHD 2nd TB-x606x” with the latest ROM installed, having ROOT, MAGISK and modules installed

view attachment 5620285

THIS PROCESS is WORKS work WITH ALMOST ALL device , ONLY IF THEY HAVE THE BOOTLOADER correctly unlocked WITHOUT THE need OF A TWRP .

If the guide help you , please comment , if it did n’t work for you , please comment as I will try to help you solve the problem .

Currently I will not be contributing more to the community since I do not have my own computer, the computer I use will only be there for a few days, after that they will take it away.

when I have a new computer, I will be sharing RecoveryTWRP for some devices modified by me or some other help that I am able to carry out and finish as a project.

I thank XDA for creating this space to help, guide and for everyone to learn in the process.

I send you greetings from Peru.